Used Wadkin CC2000S CNC Router
Used CNC Router Wadkin CC2000S 3 Axis for sale. | |||
| Router head: | One 4hp, extraction cooled | ||
| Veining head: | One air driven | ||
| Drilling unit: | One air | ||
| Table size: | 1000mm x 700mm | ||
| X | Y | Z | |
| Programmable axis: | from "C" frame centre | 175mm | |
| 920mm | 620mm | ||
| Feed | 0-10 m/min | 0-6 m/min | |
| Rapid traverse: | 12 m/min | 6 m/min | |
| Controller: | Bosch CC100 with 16k memory | ||
| Equipped with: | Vacuum hold down device Matrix vacuum table | ||
| Checked, serviced and painted | |||
Used CNC Routers.
Used and Refurbished Machines.
Used CNC Routers For Sale | |||||
| Table size mm | Table size mm | ||||
| Wadkin CC2000S 3 Axis router | 1000 | 700 | RYE MA 2010 router | 1700 | 1000 |
| RYE MA 2400 router | 2445 | 1280 | Wadkin UX 1691 TC | 1600 | 915 |
| New Technos 26 router | 2600 | 1250 | |||
| Wadkin UX 2F C3 2612 | 2760 | 1250 | CNC Technos 32 router | 3020 | 1530 |
| RYE MG 3020 router | 3020 | 1530 | CNC Wadkin Omega 4 | 2 off 1630 | 1630 |
Routers | |||||
PHS Associates